Menu
Decentral drive technology requires special solutions. The inverters must be adapted to the prevailing environmental conditions and must reliably fulfil their tasks. KOCH offers fitting brake resistors with a high protection class. KOCH is also capable of meeting specific requirements at any time. The solution shown here has a wave hose, which was needed as insect protection for an airport project. KOCH offers many other customer-specific solutions.
Rated power
Allocation – Braking resistors to G110D
Resistance
80 | 160 | 390 Ohm
Contact
Michael Koch GmbH
Phone: +49 7251 96 26-200
Mail: mail@bremsenergie.de
| SINAMICS products | nominal voltage | Framesize | min /max. power (HO – LO) | distance above/ below | KOCH number | max Power kW 5% duty-cycle | Ohm value | nominal power [W] |
| G110D | 400 | A | 0,75 – 3,0 | 100 | BWD250390HSI | 1,50 | 390 | 100 |
| G110D | 400 | B | 4,0 | 100 | BWD500160HSI | 2,75 | 160 | 200 |
| G110D | 400 | C | 5,5 – 7,5 | 100 | BWD600080HSI | 4,00 | 80 | 240 |
*Test conditions: Water jet from nozzle 6.3 mm inside diameter, flow rate 12.5 l / min +/- 5%, water pressure according to volume flow, distance 2.5- 3m, test duration 3min.
** With fourfold type power and free convection. 1. no short-circuit, 2. no fault to frame, 3. self-extinguishing, 4. no melting of casing. Type power always corresponds to 35% duty cycle of the respective resistor type.
| Parameter | Symbol | Value | Unit | Conditions |
|---|---|---|---|---|
| Tolerance (resistance) | ± 5 | % | Room temperature | |
| Temperature coefficient | TK | 20 … 100 | 10-6/K | |
| Insulation resistance | Riso | ≥ 100 | MΩ | Umess = 1,000 VDC |
| Inductance | L | ≤ 30 | µH | f = 300 kHz, Umess = 50 mV |
| Capacity against enclosure | C | ≤ 300 | pF | f = 300 kHz, Umess = 50 mV |
| Certifications | cCSAus | Standard CSA-C22.2 and UL508 | ||
| cCRus | Standard CSA-C22.2 and UL508 | |||
| Maximum permissible operating voltage | UB | ≤ 700 AC | V | Taking into consideration the „intrinsic safety“ |
| UB | ≤ 1,000 DC | V | Taking into consideration the „intrinsic safety“ | |
| Maximum permissible operating voltage | UB | ≤ 600 AC | V | according to CSA |
| UB | ≤ 848 DC | V | according to CSA | |
| Isolation voltage | Uiso | ≥ 4,000 AC | V | f = 50 Hz; t = 1 s |
| Max. permissible case temp. | ϑc | ≤ 250 | °C | unobstructed convection |
| Storage temperature | ϑs | -25 … +85 | °C |
Dimensions and mounting holes (mm)
